Point Endo
The Point Endo is a medium-duty, mechanical articulating prosthetic finger specifically designed to be integrated into a cosmetic silicone covering. It is designed for light to medium duty applications and has a narrow profile and smooth exterior with no grip surfaces or contours.
Point Designs’ prosthetic fingers are made from semi-hollow titanium using a laser powder bed fusion. The Point Endo takes all that we have learned from our other products and reduces weight and digit profile, while enabling integration with a cosmetic covering.
Point Endo is ideal for people with near metacarpophalangeal (MCP) level amputation. Slightly distal (especially if the residual digit range of motion is minimal) and proximal partial hand patients are also good candidates.
- One-handed positioning
- Anatomical flexion and rotation around the MCP joint
- 150 lb load rating
- Low weight, high strength
- Designed for cosmetic cover integration
- 4 standard lengths (80, 85, 90, and 95 mm measured from MCP joint center to fingertip)
- 9 locking levels of flexion
- 150 lb (68 kg) load capacity
- 0.7 oz – 0.88 oz (20 g – 25 g) in weight, depending on length
- Patented ratcheting mechanism enabling unilateral operation with auto spring back
- Reduced profile lowers weight and enables easy integration with a wide variety of prosthetic covers
- Anatomical rotation about the patient’s metacarpophalangeal (MCP) joint
To operate the Point Endo, the user positions the digit into one of the 9 locking levels of flexion by pushing the dorsal side against an opposing surface (e.g., table, thigh, etc.). The device locks into place automatically, enabling the individual to perform their desired task.
There are two methods to extend the Point Endo:
- Press the button on the dorsal side of the digit
- Fully flex the digit to engage the auto spring back feature (single-handed use)
Mounting Kit
The Point Endo mounting kit is a separately purchased, required component, in order to align and integrate the Point Endo into a prosthesis and retain the respectively published load rating.
- Accommodates 1-4 finger fittings
- Pre-alignment between fingers
- Lamination spacers and hardware included
- Breakaway design
